Industrial Accidents, Construction Accidents
Phone: (440) 838-1191
Work in this area generally covers: 
  • determining whether:
*
conformed with applicable:
  • facility design 
  • facility operations 
  • equipment
  • procedures 
Reconstruction of such accidents determines whether the facilities or equipment caused or contributed to the accident. Work in this area also generally includes determining whether revision of the facilities, operation, equipment or procedures was required for safety.  
  • accepted engineering practices
  • codes, standards and regulations
specifically for the safety of: 
  • industrial facilities and operations
  • commercial facilities and operations
  • construction facilities and activities
  • evaluating safety design and safety procedures for industrial facility operations, including manufacturing facility operations, against accepted safety standards 
      MAAFE
  • determining applicability and compliance with OSHA Regulations for industrial and construction activities,   facilities and sites  
      MAAFE
  • determining applicability and compliance with state regulations for industrial and construction activities,      facilities and sites, such as the Industrial Commission of Ohio Specific Safety Requirements 
      MAAFE
  • determining applicability and compliance with industry, technical organization and (other) governmental      codes, standards and recommended practices for industrial, commercial and construction activities and      facilities and sites 
      MAAFE
  • determining application of generally accepted standards for the safety of equipment and facilities  
  • determining whether equipment was properly installed  
      MAAFE
  • determining whether safety equipment (including safeguards such as barrier guards, light curtains, dual      operating buttons, etc.) and safety instrumentation had been in place and were properly used
      MAAFE
  • determining whether safety procedures had been in place and were properly used 
  • determining whether ventilation was properly used, where this is a safety issue  
  • determining whether drainage and sewer connections were effective and safe, where this is a safety issue.
  • accidents involving industrial, commercial and construction equipment* 
  • exposures to chemical vapors
  • operations resulting in asphyxiation
  • liquid spills causing burns
  • runaway chemical reactions not fully protected by overpressure protection devices 
  • incorrect discharge of fire protection sprinkler system
  • falls from scaffolding and ladders
  • falls through walking surface openings
  • falls through failed walking surfaces
  • falls into flumes (persons and persons on equipment)
  • tank explosions, including during cutting
  • rupture of natural gas pipeline with fire and explosion
  • restaurant, and commercial laundry operations, resulting in fire and/or explosion
  • indoor and outdoor construction sites
  • steel mills
  • steel processing facilities
  • metal working facilities
  • rubber and plastics processing facilities
  • facilities manufacturing plastic, rubber, wood and metal products, for consumer, commercial, and    industrial use
  • chemical manufacturing facilities
  • warehouses
  • commercial laundry
  • restaurants
  • scrap salvage facilities
  • outdoor storage facilities
  • similar industrial and commercial facilities.  
  • persons employed by the owner or operator of the facility, or construction contractor/sub-contractor
  • persons not employed by the owner or operator of the facility, or construction contractor/sub-contractor
Madden Accident Analysis & Forensic Engineering
8803 Brecksville Road, Suite 7-216, Cleveland, Ohio 44141
phone: 440-838-1191 fax: 440-838-1192
email address: info@maddenforensic.com, info@maafe.com
website: www.maddenforensic.com, www.maafe.com
MAAFE
Madden
Accident
Analysis &  
Forensic
Engineering
MAAFE
took extensive college coursework in engineering design of industrial facilities and equipment and the operation of industrial equipment and facilities
  Examples of persons involved in analyzed accidents
                               see examples of analyzed accidents and involved facilities in previous 2 sections above
  Examples of Accidents Analyzed
                                    ● see examples of facilities in which analyzed accidents occurred, in next section below
  Examples of facilities in which analyzed accidents occurred
                                       see examples of persons involved in analyzed accidents in next section below
  Examples of Analyses to Address Issues for Industrial and Commercial Operations, Construction 
     Activities, Commercial and Industrial Facility Design and Workplace Accidents
  Our Engineering Analysis of Industrial and Commercial Operations, Construction 
     Activities, Commercial and Industrial Facility Design and Workplace Accidents
Our Engineering Analyses of Industrial and Commercial Operations, Construction Activities, Commercial and Industrial Facility Design and Workplace Accidents include, as appropriate, investigation, engineering analysis and reconstruction of the accident, as required to address the issues. Our analysis includes determination of adherence to the Occupational and Health Administration (OSHA) Code and any state and local regulations for industrial and commercial operations and facilities, and construction activities.
See the next section "Examples of Analyses to Address Issues ..." for more information on the analyses.
  click on underlined words to use links - if no word is underlined try hovering the mouse over words to see underlines
  Experience and Qualifications of James D. Madden, P.E. in regard to Industrial, Commercial        and similar Operations; Construction and similar Activities; Commercial, Industrial and              similar Facility Design, as involved in Workplace Accidents
worked in industrial facilitiesdesigned industrial facilities, and assisted in construction during 17 years working in industrial operations and design engineering
  attended engineering seminars presented by the National Academy of Forensic Engineers
regularly attend additional technical courses and seminars each year to meet the requirements for continuing engineering education for the Professional Engineer's license
  over 40 years of engineering experience, with: 
  17 years experience in industrial operations, engineering design and construction assistance 
  30 years experience in forensic engineering, including:  
  working on over 1000 cases
  issuing over 600 reports and over 60 affidavits
  testifying in over 90 depositions and over 75 trials
over 155 incidents involving industrial, commercial and similar operations, construction and similar activities, and commercial, industrial and similar facility design have been investigated, analyzed and reconstructed as part of the forensic engineering work during the last 30 years
  
  
earned 2 Engineering degrees, Bachelor of Science and Master of Engineering, and took additional post-degree coursework, with coursework in physics, chemistry, mathematics, engineering mechanics, mechanical engineering, chemical engineering and normal psychology
at the start of forensic work, completed refresher and additional post-degree college credit coursework and continuing education coursework in mechanical engineering, metallurgy and materials
earned the Professional Engineers license (P.E.) by taking the National Council of Engineering Examiners' (NCEE) examination in Fundamentals of Engineering and the Mechanical Engineering and Chemical Engineering sections of the NCEE examination in Principles and Practices of Engineering
designated a Diplomate Forensic Engineer by the National Academy of Forensic Engineers in accordance with the standards of the Council of Engineering and Scientific Specialty Boards (CESB)
  
  
  
  
  
<< click for a description of the typical activities and work performed
<< click for examples of Accidents analyzed
<< click for examples of Facilities involved in accidents
<< click for examples of Persons involved in accidents
See the previous section "Our Engineering Analysis ..." for more information on the analyses.
<< click for a description of the typical activities and work performed
<< click for examples of Accidents analyzed
<< click for examples of Facilities involved in accidents
<< click for examples of Persons involved in accidents
see the section below for  examples of persons involved in which accidents - see the section above for  examples of accidents analyzed
<< click for additional information on the analyses to address issues
<< click for additional information on the engineering analyses
Our Work with Industrial, Commercial, Construction and similar Facilities, Operations and Activities - includes investigation and engineering analysis of industrial, commercial and similar facility operations, design and conditions, and construction and similar site conditions and activities, and reconstruction of accidents associated with these facilities, sites, operations and activities. 
Our work includes assessment of the effectiveness of the use of safeguards and warnings, and the adherence to applicable codes, standards, regulations and recommended practices, including the OSHA Code, for both the equipment and facilities and the operations and activities. Our work includes assessment of the activities of the persons involved in the accident, as these activities relate to the accident. 
In regard to the facilities analyzed, our work in this area covers issues which are more specific to the special characteristics of industrial, commercial and similar facilities and construction and similar sites, rather than the general features and characteristics of a broad range of buildings and properties which are covered on the Premises Accidents page on www.maddenforensicengineering.com (see link in Table of Contents above). 
Table of Contents - Accidents in Industrial, Commercial, Construction and similar Workplaces, with related Subjects - links to content on this page 
Industrial, Commercial and Construction Accidents
^^^ click on buttons to go to other pages covering these subjects  ^^^
Copyright 2011, 2012, 2015, 2016 by Madden Accident Analysis & Forensic Engineering. All rights reserved. This website contains photographs which are licensed with restrictions that prohibit downloading, reproduction, re-publication or re-transmission .
Madden Accident Analysis & Forensic Engineering, through its Senior Forensic Engineer, James D. Madden, P.E., a licensed professional engineer, has performed Accident Investigations, Engineering Analyses and Accident Reconstructions routinely for accidents, incidents and cases located in Ohio, Pennsylvania, Michigan, and New York, in the technical areas which are noted in this website, as well as providing expert reports and testifying in court proceedings in these states in the capacity of an Expert Witness, including depositions, arbitrations and/or trials, with Forensic Engineering work also performed in, and/or for cases in, Illinois, Maryland, North Carolina, Vermont and Utah. 
Madden Accident Analysis & Forensic Engineering, through its Senior Forensic Engineer, James D. Madden, P.E., a licensed professional engineer, has performed Accident Investigations, Engineering Analyses and Accident Reconstructions for accidents, incidents and cases in the metropolitan areas of Cleveland, Akron, Canton, Toledo, Warren, Youngstown, Mansfield, Columbus, Dayton, Cincinnati, Lima, Findlay, Marietta and Steubenville, as well elsewhere throughout Ohio, and the metropolitan areas of Pittsburgh and Erie, as well as elsewhere throughout western and central Pennsylvania, and the metropolitan areas of Detroit, Ann Arbor, Lansing, Flint and Port Huron, as well as elsewhere in southern Michigan, and the metropolitan areas of Buffalo and Syracuse, as well as elsewhere in western and central New York state. In many of these areas James D. Madden, P.E. has provided expert reports and testified in the capacity of an Expert Witness in court proceedings, including depositions, arbitrations and/or trials.  
Madden Accident Analysis & Forensic Engineering, through its Senior Forensic Engineer James D. Madden, P.E., is available for Accident Investigations, Engineering Analyses, Accident Reconstructions, and testimony in deposition, arbitration and trial, for cases located throughout North America.
Consultation is available before starting a case. We invite you to
consult with us. There is no charge for an initial phone consultation.
Call us, or if you prefer we can schedule the consultation in advance.
Consultation with James D. Madden, PE, a Professional Engineer, and Forensic
Engineering Consulting and Testifying Expert Witness, is available to the client at all
times during the work - before, during, and after the investigation,
engineering analysis, reconstruction, report, and any other work on the case.
Phone: (440) 838-1191
Download a Summary or Detailed Curriculum Vitae (CV) / Resume' for James D. Madden, P.E.,
email us, and bookmark this website. 
  Qualifications of James D. Madden, P.E., Senior Forensic Engineer
  Downloads and Links -  Curriculum Vitae, Email and Bookmark
For mailing addressphonefax and email address click a button below the Fee Schedule section.
Contact us by phone, fax, mail or email for a copy of the Fee Schedule for charges for engineering
and consulting services and testimony.  Click a button below for contact information.
  Contact information
  Fee Schedule
Phone: (440) 838-1191
Over the last 30 years we have regularly worked on accidents which occurred in Ohio, Pennsylvania, Michigan, New York and nearby, including inspections of accident sites, equipment, and facilities, with reports and testimony. During these 30 years we have also worked on accidents which occurred in other states, and equipment and facilities located in other states, with inspections of accident sites, equipment, and facilities, from Utah and Kansas to Vermont and North Carolina, with reports and testimony for these accidents, when applicable.
  Geographic Area of Practice - North America 
Contact us to discuss your case by phone at NO CHARGE
This consultation can be scheduled in advance to meet your schedule.
  verbal reports, by telephone or in face-to-face conferences
We present the results of our investigations, engineering analyses and reconstructions in 
the client's choice of any, or all, of the following: 
  Presentation of results of our work
  Our Typical Work Activities and Products, when warranted by the case
  written reports and affidavits
  deposition testimony, including video deposition
  trial testimony and arbitration testimony
James D. Madden, P.E., while performing Forensic Engineering work full-time for over 
the last 30 years, for both plaintiff and defendant, has to date:
  Forensic Engineering Work by Senior Forensic Engineer James D. Madden, P.E. 
  completed over 1000 cases
  written and issued over 600 reports                  
  testified in over 90 depositions
  written and issued over 60 affidavits
  testified in over 75 trials                               
See details of the pre-forensic work on the Employment Page and the Engineering Design Page.
See details of the forensic work throughout this website, and a summary on the Employment Page.
See more about qualifications of  James D. Madden, P.E. on the Qualifications Page.
For more on qualifications see the Qualifications Page<<< Click on the underlined text
The qualifications of James D. Madden, P.E., Senior Forensic Engineer, Consulting and Testifying
Forensic Engineer and Accident Reconstruction Engineer, are listed on the Qualifications Page and the Specialties Work Page.   <<< Click on the underlined text.
Use the Search Box at the left to search the whole website.  
Use Control F, 'Ctrl' + 'F', to locate specific words on this page.
Bookmark this site by typing Control D ('Ctr' + 'D'). 
  Also see Equipment Accidents for equipment involved in workplaces accidents, on another website.
  
      click on the underlined squares and underlined words to link to the subjects
  Our Forensic Engineering Work - number of  ● Cases  ● Reports  ● Affidavits  ● Testimonies  
  Experience & Qualifications in regard to Industrial, Commercial and Construction Accident
  Our Work with Workplace Accidents, including SafeguardsWarnings and Codes and Standards
  Curriculum Vitae, CV, Resume'
  Contact Us by Phone, Mail or Email 
  Consult, before and after assignment
  Fee Schedule Availability
  Examples of Issues Analyzed
  Examples of Workplace Accidents Analyzed
  Examples of Facilities involved in Accidents
  Examples of Persons involved in Accidents
  Our Typical Work Activities and Products
  Presentation of The Results of Our Work
  Other Experience & Qualifications
  Geographic Area available for Work
  Links to Other Pages (left sidebars)
  Our Engineering Analysis of Operations, Activities and Facilities associated with Workplace Accidents
Phone: (440) 838-1191
Phone: (440) 838-1191
to top of page
Contact us for more information  ▪  ph 440-838-1191 ▪  info@maddenforensic.com
Madden Accident Analysis & Forensic Engineering
30 Years Investigating, Analyzing, Reconstructing and Testifying about Accidents
Workplace Accidents
Page Links
for more information, 
click on subject listings below
Senior Forensic Engineer's


Related Basic Specialties
General Pages
*
These Specialties are in a website which will open in a separate tab to the right of the current tab. This website in the current tab and the new website will be available side by side.


accidents involving 
Industrial, Commercial and Extraction Operations and Facilities, 
and Farming, Forest, Construction and similar Activities and Sites
Industrial, Commercial and Construction Accidents
Other Information which is listed in the page Table of Contents below
Also see Premises Accidents for accidents in workplaces involving premises features, on another website opening in a separate browser tab, with both websites available side to side.
Our work investigating, analyzing and reconstructing accidents, and presenting the results, may include any 
or all of the following, depending on the needs of the case: 
  inspection of the accident site, such as a roadway, outdoor facilities, building or industrial facilities
  interviewing witnesses (often during the inspection of the accident site, product and/or equipment)
coordinating or interfacing with others while they are preparing specialized exhibits such as video animations and videos of demonstrations
review and study of case documents, evidence and applicable codes, standards, regulations and recommended practices
  written reports and affidavits, and exhibits
drawings, calculations, graphical analyses, computer analyses, etc. as required to analyze and reconstruct the accident, and to present the engineering analysis and reconstruction
  testing accident items and exemplar items (such as consumer products)
  photography and/or video of the accident site and involved equipment
  testimony in deposition, trial and arbitration




inspection of the involved equipment, in current condition, including in damaged condition (such as crashed vehicles); and when available for operation, during operation (such as industrial equipment)
For examples of this equipment see Industrial, Commercial, Construction Equipment in a separate website. This website page will open in a separate browser tab, available side-by-side with the present website. 
Links on pages of This Website include:

This website was designed in Google Chrome, with adjustments for Firefox, Edge and Internet Explorer. This website will function in Chrome and Chrome-based browsers, including Opera and Torch. This website will also function in Firefox, Edge and Internet Explorer, with some minor layout and text issues possible. This website may not function in Safari. 

If lines of text overlap in this website, check the browser zoom setting, reducing the zoom should prevent overlap of lines of text.
Left SideBars at the top of the pages - click on the subjects - these subjects are preceded by squares (■)
Page Title lines - click on the Title lines to link to the Table of Contents for the page, or other appropriate page location
squares (■) with words to the right click on the words
underlined squares (  ) with words to the right click on the underlined squares
underlined words (example) - click on the underlined words or just the underline - note that the POINTING FINGER will indicate when the cursor is in position to click for the link
words with a colored background (excluding section headings) - click on the words
bullets (●) with words to the right (excluding lists in paragraphs) - click on the words  
Links are indicated by underlines, squares (■), colored backgrounds, and sometimes by the position on the page, as described in the list below. When a link is ready to be clicked, to jump to a new location on the page, or elsewhere in the website, or to another website, this will be indicated in the common browsers by the cursor becoming a hand with the index finger pointing to the link. When the hand with the index finger is not showing there is no link to click on.